Copper Nickel Forged and Machined Fittings

Good Raw Material
Good Dimensions
Good Surfaces
BV Approved Flanges
تم إصدار MTC EN10204 3.1

Your Premier Copper Nickel Forged and Machined Fittings Manufacturer

الشركة المصنعة المعتمدة من BV

Shihang has been approved by Bureau Veritas.Summary of recognition range:Copper Nickel Pipe, Copper Nickel Flanges , Copper Nickel Pipe Fittings.

Third Party Inspection Available

If the end user require third party inspection , it is available.Lots of third party inspection organization have inspected our products , Such BV,SGS,ABS etc.

0% مصنع أنابيب الشكوى

تصدر شركة شيهانج أنابيب النحاس والنيكل والوصلات منذ 10 سنوات ولم ترد أي شكاوى من المستخدم النهائي. لدينا مختبر اختبار خاص بنا وقدرة قوية على مراقبة الجودة.

إصدار شهادة EN 102043.1

Each order , our mill test certificate as per EN 10204 3.1 will be issued with the products. Confirm our products are totally meet with your requirements.

أرسل لنا متطلباتك

دع شركة شيهانج تدعمك.

اتصال

For copper nickel pipe fittings , there are three main connection typel

butt weld
socket weld
threaded

Copper nickel socket weld and threaded pipe fittings are all belong to copper nickel forged and machined fittings.

Normally the size is from 1/2″ to 2″

Standard:EEMUA 146 / 234 and ANSI standard

For butt-weld elbows, tees, reducers, saddles, caps and stub ends, return to the main تجهيزات الأنابيب النحاسية والنيكل page.

منتج تفاصيل

Elbow
Tee
Coupling
Nipple
Olet
Plug
Union
Bushing
Socket

Forged Socket Weld Elbow EEMUA 146

القطر الخارجي للأنبوب		ØA	B	C	ØE	نظري
د		ØA	B	C	ØE	وزن
الاسمي	فِعلي	مم	مم	مم	مم	Kg/piece
بوصة	مم	مم	مم	مم	مم	Kg/piece
0.38	16	22.2	20	10	16.1	0.07
0.5	20	26.05	25	10	20.1	0.1
0.75	25	33	29	13	25.1	0.26
1	30	38	34	13	30.1	0.32
1.25	38	46	38	13	38.1	0.59
1.5	44.5	56	44	13	44.6	1.01
2	57	63.5	50	16	57.3	1.31

القطر الخارجي للأنبوب		ØA	B	C	ØE	نظري
د		ØA	B	C	ØE	وزن
الاسمي	فِعلي	مم	مم	مم	مم	Kg/piece
بوصة	مم	مم	مم	مم	مم	Kg/piece
0.38	16	22.2	19	10	16.1	0.07
0.5	20	26.05	19	10	20.1	0.1
0.75	25	33	22.5	13	25.1	0.26
1	30	38	25.5	13	30.1	0.41
1.25	38	46	28.5	13	38.1	0.64
1.5	44.5	56	33	13	44.6	0.69
2	57	63.5	36	16	57.3	1.09

Forged Socket Weld Elbow ANSI B16.11

DN		ANSI B16.11
			D			C						G
	الاسمي	B	مم			مم						مم			J
	بوصة	مم	3000	6000	9000	3000		6000		9000		3000	6000	9000	مم
						Ave.	Min.	Ave.	Min.	Ave.	Min.	Min.	Min.	Min.
6	1/8	11.2	7.6	4.8	-	3.18	3.18	3.96	3.43	-	-	2.41	3.15	-	9.5
		10.8	6.1	3.2
8	1/4	14.6	10	7.1	-	3.78	3.30	4.6	4.01	-	-	3.02	3.68	-	9.5
		14.2	8.5	5.6
10	3/8	18	13.3	9.9	-	4.01	3.50	5.03	4.37	-	-	3.2	4.01	-	9.5
		17.6	11.8	8.4
15	1/2	22.2	16.6	12.5	7.2	4.67	4.09	5.97	5.18	9.35	8.18	3.73	4.78	7.47	9.5
		21.8	15	11	5.6
20	3/4	27.6	21.7	16.3	11.8	4.90	4.27	6.96	6.04	9.75	8.56	3.91	5.56	7.82	12.5
		27.2	20.2	14.8	10.3
25	1	34.3	27.4	21.5	16	5.69	4.98	7.92	6.93	11.38	9.96	4.55	6.35	9.09	12.5
		33.9	25.9	19.9	14.4
32	1 1/4	43.1	35.8	30.2	23.5	6.07	5.28	7.92	6.93	12.14	10.62	4.85	6.35	9.7	12.5
		42.7	34.3	28.7	22
40	1 1/2	49.2	41.6	34.7	28.7	6.35	5.54	8.92	7.8	12.7	11.12	5.08	7.14	10.15	12.5
		48.8	40.1	33.2	27.2
50	2	61.7	53.3	43.6	38.9	6.93	6.04	10.92	9.5	13.84	12.12	5.54	8.74	11.07	16
		61.2	51.7	42.1	37.4
65	2 1/2	74.4	64.2	-	-	8.76	7.67	-	-	-	-	7.01	-	-	16
		73.9	61.2
80	3	90.3	79.4	-	-	9.52	8.30	-	-	-	-	7.62	-	-	16
		89.8	76.4
100	4	115.7	103.8	-	-	10.69	9.30	-	-	-	-	8.56	-	-	19

DN		ANSI B16.11
	الاسمي	A			C			H			G			B	L2
		90°Elbow,Tee			45°Elbow			H			G
	بوصة	مم			مم			مم			مم
		2000	3000	6000	2000	3000	6000	2000	3000	6000	2000	3000	6000
6	1/8	21	21	25	17	17	198	22	22	25	3.18	3.18	6.35	6.40	6.7
8	1/4	21	25	28	17	19	22	22	25	33	3.18	3.30	6.60	8.10	10.2
10	3/8	25	28	33	19	22	25	25	33	38	3.18	3.51	6.98	9.10	10.4
15	1/2	28	33	38	22	25	28	33	38	46	3.18	4.09	8.15	10.90	13.6
20	3/4	33	38	44	25	28	33	38	46	56	3.18	4.32	8.53	12.70	13.9
25	1	38	44	51	28	33	35	46	56	62	3.68	4.98	9.93	14.70	17.3
32	1 1/4	44	51	60	33	35	43	56	62	75	3.89	5.28	10.59	17.00	18
40	1 1/2	51	60	64	35	43	44	62	75	84	4.01	5.56	11.07	17.80	18.4
50	2	60	64	83	43	44	52	75	84	102	4.27	7.14	12.09	19.00	19.2
65	2 1/2	76	83	95	52	52	64	92	102	121	5.61	7.65	15.29	23.60	28.9
80	3	86	95	106	64	64	79	109	121	146	5.99	8.84	16.64	25.90	30.5
100	4	106	114	114	79	79	79	146	152	152	6.55	11.18	18.67	27.70	33

Socket Weld and Threaded Tees

Forged tee is to changes the direction of the pipe, because it is forged so it can reach the higher pressure can withstand a maximum of 9000LB, so some people call it a high pressure tee.
It mainly includes socket welding elbow and threaded tee,

forged socket welding tees pressure level is divided into: 3000LB, 6000LB , 9000LB,

threaded tees pressure level is divided into:2000LB, 3000LB,6000LB

type: equal tee, reducing tee

Forged Socket Wled Or Capillary Ends Equal Tee EEMUA 146

القطر الخارجي للأنبوب		ØA	B	ØE	C	نظري
د		ØA	B	ØE	C	وزن
الاسمي	فِعلي	مم	مم	مم	مم	Kg/piece
بوصة	مم	مم	مم	مم	مم	Kg/piece
0.38	16	22.2	20	16.1	10	0.09
0.5	20	26.05	25	20.1	10	0.12
0.75	25	33	29	25.1	13	0.31
1	30	38	34	30.1	13	0.37
1.25	38	46	38	38.1	13	0.65
1.5	44.5	56	44	44.6	13	1.08
2	57	63.5	50	57.3	16	1.43

Forged Socket Weld Or Capillary Ends Reducing Tee EEMUA 146

القطر الخارجي للأنبوب						ØA	C	ØE	C	ØG	H	نظري
د						ØA	C	ØE	C	ØG	H	وزن
الاسمي			فِعلي			مم	مم	مم	مم	مم	مم	Kg/piece
بوصة			مم			مم	مم	مم	مم	مم	مم	Kg/piece
0.5	x	0.125	20	x	16	26.5	25	20.1	10	16.1	10	0.14
0.75	x	0.125	25	x	16	33	29	25.1	13	16.1	10	0.37
0.75	x	0.5	25	x	20	33	29	25.1	13	20.1	10	0.35
1	x	0.125	30	x	16	38	34	30.1	13	16.1	10	0.47
1	x	0.5	30	x	20	38	34	30.1	13	20.1	10	0.45
1	x	0.75	30	x	25	38	34	30.1	13	25.1	13	0.41
1.25	x	0.125	38	x	16	46	38	38.1	13	16.1	10	0.83
1.25	x	0.5	38	x	20	46	38	38.1	13	20.1	10	0.81
1.25	x	0.75	38	x	25	46	38	38.1	13	25.1	13	0.77
1.25	x	1	38	x	30	46	38	38.1	13	30.1	13	0.73
1.5	x	0.125	44.5	x	16	56	44	44.6	13	16.1	10	1.35
1.5	x	0.5	44.5	x	20	56	44	44.6	13	20.1	10	1.33
1.5	x	0.75	44.5	x	25	56	44	44.6	13	25.1	13	1.29
1.5	x	1	44.5	x	30	56	44	44.6	13	30.1	13	1.25
1.5	x	1.25	44.5	x	38	56	44	44.6	13	38.1	13	1.17
2	x	0.125	57	x	16	63.5	50	57.3	16	16.1	10	1.89
2	x	0.5	57	x	20	63.5	50	57.3	16	20.1	10	1.87
2	x	0.75	57	x	25	63.5	50	57.3	16	25.1	13	1.83
2	x	1	57	x	30	63.5	50	57.3	16	30.1	13	1.79
2	x	1.25	57	x	38	63.5	50	57.3	16	38.1	13	1.71
2	x	1.5	57	x	44.5	63.5	50	57.3	16	44.6	13	1.62

Forged Socket Weld Tee ANSI B16.11

N		ANSI B16.11
			D			C						G
	الاسمي	B	مم			مم						مم			J
	بوصة	مم	3000	6000	9000	3000		6000		9000		3000	6000	9000	مم
						Ave.	Min.	Ave.	Min.	Ave.	Min.	Min.	Min.	Min.
6	1/8	11.2	7.6	4.8	-	3.18	3.18	3.96	3.43	-	-	2.41	3.15	-	9.5
		10.8	6.1	3.2
8	1/4	14.6	10	7.1	-	3.78	3.30	4.6	4.01	-	-	3.02	3.68	-	9.5
		14.2	8.5	5.6
10	3/8	18	13.3	9.9	-	4.01	3.50	5.03	4.37	-	-	3.2	4.01	-	9.5
		17.6	11.8	8.4
15	1/2	22.2	16.6	12.5	7.2	4.67	4.09	5.97	5.18	9.35	8.18	3.73	4.78	7.47	9.5
		21.8	15	11	5.6
20	3/4	27.6	21.7	16.3	11.8	4.90	4.27	6.96	6.04	9.75	8.56	3.91	5.56	7.82	12.5
		27.2	20.2	14.8	10.3
25	1	34.3	27.4	21.5	16	5.69	4.98	7.92	6.93	11.38	9.96	4.55	6.35	9.09	12.5
		33.9	25.9	19.9	14.4
32	1 1/4	43.1	35.8	30.2	23.5	6.07	5.28	7.92	6.93	12.14	10.62	4.85	6.35	9.7	12.5
		42.7	34.3	28.7	22
40	1 1/2	49.2	41.6	34.7	28.7	6.35	5.54	8.92	7.8	12.7	11.12	5.08	7.14	10.15	12.5
		48.8	40.1	33.2	27.2
50	2	61.7	53.3	43.6	38.9	6.93	6.04	10.92	9.5	13.84	12.12	5.54	8.74	11.07	16
		61.2	51.7	42.1	37.4
65	2 1/2	74.4	64.2	-	-	8.76	7.67	-	-	-	-	7.01	-	-	16
		73.9	61.2
80	3	90.3	79.4	-	-	9.52	8.30	-	-	-	-	7.62	-	-	16
		89.8	76.4
100	4	115.7	103.8	-	-	10.69	9.30	-	-	-	-	8.56	-	-	19

Forged Threaded Tee ANSI B16.11

DN		ANSI B16.11
	الاسمي	A			C			H			G			B	L2
		90°Elbow,Tee			45°Elbow			H			G
	بوصة	مم			مم			مم			مم
		2000	3000	6000	2000	3000	6000	2000	3000	6000	2000	3000	6000
6	1/8	21	21	25	17	17	198	22	22	25	3.18	3.18	6.35	6.40	6.7
8	1/4	21	25	28	17	19	22	22	25	33	3.18	3.30	6.60	8.10	10.2
10	3/8	25	28	33	19	22	25	25	33	38	3.18	3.51	6.98	9.10	10.4
15	1/2	28	33	38	22	25	28	33	38	46	3.18	4.09	8.15	10.90	13.6
20	3/4	33	38	44	25	28	33	38	46	56	3.18	4.32	8.53	12.70	13.9
25	1	38	44	51	28	33	35	46	56	62	3.68	4.98	9.93	14.70	17.3
32	1 1/4	44	51	60	33	35	43	56	62	75	3.89	5.28	10.59	17.00	18
40	1 1/2	51	60	64	35	43	44	62	75	84	4.01	5.56	11.07	17.80	18.4
50	2	60	64	83	43	44	52	75	84	102	4.27	7.14	12.09	19.00	19.2
65	2 1/2	76	83	95	52	52	64	92	102	121	5.61	7.65	15.29	23.60	28.9
80	3	86	95	106	64	64	79	109	121	146	5.99	8.84	16.64	25.90	30.5
100	4	106	114	114	79	79	79	146	152	152	6.55	11.18	18.67	27.70	33

Socket Weld and Threaded Couplings

It is an accessory commonly used in copper nickel pipe connections.

Usage: Copper Nickel C70600 Cuni 90/10 Coupling is used to connect two tubes .

Forging is the use of copper nickel bar forging after forming, use the lathe to produce the couplings

Socket Weld Or Capillary End Coupling

القطر الخارجي للأنبوب		Straight Coupling
القطر الخارجي للأنبوب		ØA	L	ØE	C	نظري
د		ØA	L	ØE	C	وزن
الاسمي	فِعلي	مم	مم	مم	مم	Kg/piece
بوصة	مم	مم	مم	مم	مم	Kg/piece
0.38	16	23	23	16.1	10	0.04
0.5	20	27	23	20.1	10	0.06
0.75	25	32	30	25.1	13	0.08
1	30	37	30	30.1	13	0.1
1.25	38	45	30	38.1	13	0.12
1.5	44.5	52	31	44.6	13	0.17
2	57	64	38	57.3	16	0.22

القطر الخارجي للأنبوب		Half Coupling
القطر الخارجي للأنبوب		ØA	L	ØE	C	نظري
د		ØA	L	ØE	C	وزن
الاسمي	فِعلي	مم	مم	مم	مم	Kg/piece
بوصة	مم	مم	مم	مم	مم	Kg/piece
0.38	16	23	13	16.1	10	0.02
0.5	20	27	13	20.1	10	0.03
0.75	25	32	17	25.1	13	0.04
1	30	37	17	30.1	13	0.05
1.25	38	45	17	38.1	13	0.06
1.5	44.5	52	18	44.6	13	0.08
2	57	64	22	57.3	16	0.11

Socket Weld Coupling ANSI B16.11

DN	الاسمي	ANSI B16.11
		B	C		D	E	ف	K	J
	بوصة	B	Avg	Min	D	E	ف	K	J
		مم	مم	مم	مم	مم	مم	مم	مم
6	1/8	10.8	3.18	3.18	6.9	6.5	16.0	4.8	9.5
8	1/4	14.2	3.78	3.30	9.3	6.5	16.0	4.8	9.5
10	3/8	17.6	4.01	3.50	12.6	6.5	17.5	4.8	9.5
15	1/2	21.8	4.67	4.09	15.8	9.5	22.5	6.4	9.5
20	3/4	27.2	4.90	4.27	21	9.5	24.0	6.4	12.5
25	1	33.9	5.69	4.98	26.7	12.5	28.5	9.6	12.5
32	1 1/4	42.7	6.07	5.28	35.1	12.5	30.0	9.6	12.5
40	1 1/2	48.8	6.35	5.54	40.9	12.5	32.0	11.2	12.5
50	2	61.2	6.93	6.04	52.5	19.0	41.0	12.7	16.0
65	2 1/2	73.9	8.76	7.67	62.7	19.0	43.0	15.7	16.0
80	3	89.8	8.52	8.30	78	19.0	44.5	19.0	16.0
100	4	115.2	10.69	9.35	102.3	19.0	48.0	22.4	19.0

القطر الخارجي للأنبوب		Straight Coupling
القطر الخارجي للأنبوب		ØA	L	ØE	نظري
د		ØA	L	ØE	وزن
الاسمي	فِعلي	مم	مم	Thread	Kg/piece
بوصة	مم	مم	مم	(NPT)	Kg/piece
0.5	16	29	48	1/2″	0.16
0.75	25	35	51	3/4″	0.28
1	30	44	60	1″	0.38
1.25	38	57	67	1″ 1/4	0.58
1.5	44.5	64	79	1″ 1/2	0.78
2	57	76	86	2″	1.42

القطر الخارجي للأنبوب		Straight Coupling
القطر الخارجي للأنبوب		ØA	L	ØE	نظري
د		ØA	L	ØE	وزن
الاسمي	فِعلي	مم	مم	Thread	Kg/piece
بوصة	مم	مم	مم	(NPT)	Kg/piece
0.5	16	29	48	1/2″	0.16
0.75	25	35	51	3/4″	0.28
1	30	44	60	1″	0.38
1.25	38	57	67	1″ 1/4	0.58
1.5	44.5	64	79	1″ 1/2	0.78
2	57	76	86	2″	1.42

DN	الاسمي	ASNI B16.11
		W	P		D		G		B	L2
	بوصة	مم	مم		مم		مم		مم	مم
		3000&6000	3000	6000	3000	6000	3000	6000
6	1/8	32	19	-	16	22	4.8	-	6.4	6.7
8	1/4	35	25	27	19	25	4.8	6.4	8.1	10.2
10	3/8	38	25	27	22	32	4.8	6.4	9.1	10.4
15	1/2	48	32	33	28	38	6.4	7.9	10.9	13.6
20	3/4	51	37	38	35	44	6.4	7.9	12.7	13.98
25	1	60	41	43	44	57	9.6	11.2	14.7	17.3
32	1 1/4	657	44	46	57	64	9.6	11.2	17	18
40	1 1/2	79	44	48	64	76	11.2	212.7	17.8	18.4
50	2	86	48	51	76	92	12.7	15.7	19	19.2
65	2 1/2	92	60	64	92	108	15.7	19	23.6	28.9
80	3	108	65	68	108	127	19	22.4	25.9	30.5
100	4	121	68	75	140	159	22.4	28.4	27.7	33

Nipples

Nipples are fittings consisting of a short piece of pipe usually provided with a pipe thread. They are located at the end for connecting other fittings

Nipple EEMUA 146

القطر الخارجي للأنبوب		Hexagonal Nipple
		ØE	L	C.A/f	نظري
		ØE	L	C.A/f	وزن
الاسمي	فِعلي	Thread	مم	مم	Kg/piece
بوصة	مم	(NPT)	مم	مم	Kg/piece
0.25	12	1/4″	42	17	0.05
0.38	16	3/8″	47	22	0.11
0.5	20	1/2″	48	24	0.13
0.75	25	3/4″	52	30	0.2
1	30	1″	60	36	0.29
1.25	38	1″ 1/4	72	46	0.36
1.5	44.5	1″ 1/2	74	50	0.43
2	57	2″	78	65	0.59

القطر الخارجي للأنبوب		Pipe Nipple
		ØE	L	نظري
		ØE	L	وزن
الاسمي	فِعلي	Thread	مم	Kg/piece
بوصة	مم	(NPT)	مم	Kg/piece
0.25	12	1/4″	42	0.04
0.38	16	3/8″	47	0.1
0.5	20	1/2″	48	0.12
0.75	25	3/4″	52	0.19
1	30	1″	60	0.28
1.25	38	1″ 1/4	72	0.35
1.5	44.5	1″ 1/2	74	0.42
2	57	2″	78	0.58

Nipple ANSI A733-03

No	L
No	Close Nipple	Short Nipple	Long Nipple
1/8	3/4	1 1/2	2～12
1/4	7/8	1 1/2	2～12
3/8	1	1 1/2	2～12
1/2	1 1/8	1 1/2	2～12
3/4	1 3/8	1 1/2	2 1/2～12
1	1 1/2	2	2 1/2～12
1 1/4	1 5/8	2	3～12
1 1/2	1 3/4	2	3～12
2	2	2 1/2	3～12
2 1/2	2 1/2	3	3 1/2～12
3	2 5/8	3	3 1/2～12
3 1/2	2 3/4	4	4 1/2～12
4	2 7/8	4	4 1/2～12
5	3	4 1/2	5～12
6	3 1/8	4 1/2	5～12

Olets

Branch Connection fittings (also known as Olets) are fittings which provide an outlet from a larger pipe to a smaller one (or one of the same size). The main pipe onto which the branch connection is welded is usually called the Run or Header size. The pipe to which the branch connection provides a channel is usually called the Branch or Outlet size.

درجة	:	Astm B151 UNS C70600 , 7060X,CuNi 90/10,CuNiFer,CuNi10fe1.6mnAstm B151 UNS C71500 , CuNi 70/30,CuNiFer,CuNi30fe1.6mn
معيار	:	EEMUA 146 , ANSI B16.11
Type	:	Socket Weld , Threaded, Butt Weld
Pressure Rate	:	2000LB, 3000LB, 6000LB

الاسمي	ANSI B16.11
DN		A	B	C	E	D	ف	G	H
DN	بوصة	مم	مم	مم	مم	مم	مم	مم	مم
6	1/8	10	6	7	10	35	11	-	6
8	1/4	11	6	10	14	41	16	3	6
10	3/8	13	8	11	18	41	18	4	8
15	1/2	14	10	14	21	44	22	5	8
20	3/4	16	11	16	27	44	27	6	10
25	1	19	13	21	33	51	36	6	10
32	1 1/4	21	14	24	43	51	46	7	14
40	1 1/2	21	16	28	48	51	50	8	16
50	2	22	18	32	60	64	65	9	18
65	2 1/2	27	19	36	73	70	75	10	19
80	3	28	21	41	89	70	90	10	21
100	4	32	25	65	114	76	115	13	25

Union Type

Socket Weld
Threaded ( Female / Male )
One side Socket Weld / One side Threaded

الاسمي	ANSI B16.11
DN		A	B	C	E	D	ف	G	H
DN	بوصة	مم	مم	مم	مم	مم	مم	مم	مم
6	1/8	10	6	7	10	35	11	-	6
8	1/4	11	6	10	14	41	16	3	6
10	3/8	13	8	11	18	41	18	4	8
15	1/2	14	10	14	21	44	22	5	8
20	3/4	16	11	16	27	44	27	6	10
25	1	19	13	21	33	51	36	6	10
32	1 1/4	21	14	24	43	51	46	7	14
40	1 1/2	21	16	28	48	51	50	8	16
50	2	22	18	32	60	64	65	9	18
65	2 1/2	27	19	36	73	70	75	10	19
80	3	28	21	41	89	70	90	10	21
100	4	32	25	65	114	76	115	13	25

Socket DIN 86103

Form B

د Thread (NPT)	DIN86103
	FORM B
	ØA	C	L	نظري
	مم	مم	مم	وزن
	مم	مم	مم	Kg/piece
R 1/4″	20	12	20	0.03
R 3/8″	25	12	20	0.05
R 1/2″	30	14	23	0.08
R 1/2″	30	14	50	0.17
R 1/2″	30	14	75	0.25
R 1/2″	30	14	100	0.34
R 1/2″	30	14	125	0.44
R 3/4″	38	16	25	0.14
R 3/4″	38	16	50	0.28
R 3/4″	38	16	75	0.42
R 3/4″	38	16	100	0.56
R 3/4″	38	16	125	0.7
R 1″	45	18	28	0.19
R 1″	45	18	50	0.35
R 1″	45	18	75	0.52
R 1″	45	18	100	0.7
R 1″	45	18	125	0.88
R 1″ 1/4	55	20	30	0.29
R 1″ 1/2	60	22	32	0.37
R 2″	75	23	40	0.68

Form C

DIN86103
د Thread (NPT)	FORM C
	ØA	C	L	نظري
	مم	مم	مم	وزن
				Kg/piece
R 1/2″	30	14	50	0.14
R 3/4″	38	16	60	0.24
R 1″	45	18	70	0.35
R 1″ 1/4	55	20	80	0.63
R 1″ 1/2	62	22	100	0.92
R 2″	75	23	111	1.25

Copper Nickel Forged and Machined Fittings

Your Premier Copper Nickel Forged and Machined Fittings Manufacturer

منتج تفاصيل

Forged Socket Weld Elbow EEMUA 146

Forged Socket Weld Elbow ANSI B16.11

Socket Weld and Threaded Tees

Forged Socket Wled Or Capillary Ends Equal Tee EEMUA 146

Forged Socket Weld Or Capillary Ends Reducing Tee EEMUA 146

Forged Socket Weld Tee ANSI B16.11

Forged Threaded Tee ANSI B16.11

Socket Weld and Threaded Couplings

Socket Weld Or Capillary End Coupling

Socket Weld Coupling ANSI B16.11

Nipples

Nipple EEMUA 146

Nipple ANSI A733-03

Olets

Socket DIN 86103

Form B

Form C

منتجاتنا

يدعم

تابعنا

شي هانج