
Copper Nickel Slip On Flanges
Copper nickel slip on flanges actually slip over the pipe. The pipe flanges are typically made with an inside diameter of the pipe flange slightly larger than the outside diameter of the pipe. This allows the flange to slip over the pipe but to still have a somewhat snug fit. Slip-on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip-on pipe flanges. These pipe flanges are also further catagorized as a ring.
Standard:DIN 86033
Size:DN15-DN500
Thickness and Pressure Rating:10bar , 14bar
Material:Copper Nickel CuNi10Fe1,6Mn
CuNi 90/10( C70600 ) , CuNi 70/30 ( C71500 )
Standard:EEMUA 145 , EEMUA 234
Size:DN15-DN100
Thickness and Pressure Rating:16bar , 20bar
Material:Copper Nickel UNS 7060X
CuNi 90/10( C70600 ) , CuNi 70/30 ( C71500 )
Standard:ASME B16.5
Size:DN15-DN500
Thickness: Sch5s,Sch10s,Sch40s,Sch80s
Pressure Rating:150lbs, 300lbs
Material:Copper Nickel ASTM B151 UNS C70600
CuNi 90/10( C70600 ) , CuNi 70/30 ( C71500 )
Face Type:SO-RF, SO-FF